分享 收藏

MCL納米位移臺雙軸、三軸位移臺PDQ系列

品牌：MCL Think Nano
型號： Nano-PDQ Series
產地：美洲美國
供應商報價：面議

北京歐蘭科技發展有限公司更新時間：2022-03-04 17:31:39

銷售范圍售全國

入駐年限第10年

營業執照

同類產品

立即掃碼咨詢

聯系方式：400-822-6768

聯系我們時請說明在儀器網（www.189-cn.com）上看到的!

掃碼分享

詳細介紹

Features

High speed, direct drive
Two or three axis motion
50 μm or 75 μm ranges of motion
Large aperture
Large load capacity
Closed loop control

Typical Applications

Fast multi-axis scanning
Optical trap calibration
Particle tracking

Product Description

The Nano-PDQ Series are high speed multi-axis precision nanopositioning systems. The Nano-PDQ Series offers a compact footprint with a large center aperture while still offering fast performance and a resonant frequency greater than 2kHz. The Nano-PDQ Series are ideal for applications that demand high scan rates or large load capacities. When used with the Nano-Drive85 controller (model numbers with the HS suffix) step response times down to 2 milliseconds are achievable, nearly 10 times the speed of comparable systems! The Nano-PDQ Series features parallel, uncoupled motion in up to three axes and fully integrated position sensors utilizing proprietary PicoQtechnology to provide absolute, repeatable position measurement and picometer accuracy under closed loop control. Another system to consider: The new low profileNano-LPQhas similar 3-axis, high speed positioning performance but is sized to be more convenient when used on inverted research microscopes.

Compatible Software Packages:

Technical Specifications
Range of motion (X)	50 μm/75 μm
Range of motion (Y)	50 μm/75 μm
Range of motion (Z)	50 μm
Resolution (50/75 μm)	0.1/0.15 nm
Resonant Frequency (X)	2.5 kHz ±20%
Resonant Frequency (Y)	1.5 kHz ±20%
Resonant Frequency (Z)	1.0 kHz ±20%
Scanning Speed	up to 400 Hz
Stiffness	3.0 N/μm
θ_roll, θ_pitch(typical)	≤1 μrad
θ_yaw(typical)	≤3 μrad
Recommended max. load (horizontal)*	0.5 kg
Recommended max. load (vertical)*	0.2 kg
Body Material	Al, Invar or Titanium
Controller	Nano-Drive/Nano-Drive85
* Larger load requirements 首ld be discussed with our engineering staff.