承壓高達10000psi，流速范圍0-300ml/min，雙泵頭連續送液，能夠滿足高壓大流量穩定輸送液體的需求。

CP300精密恒流泵產品優越性

簡單直觀的面板鍵盤可設定以下功能：

流速設定/顯示            快速排液/排氣

低/高壓限設定           壓縮性補償設定

壓力單位設定(PSI, MPa或bar)   控制方式設定 (鍵盤, 微機或外部模擬信號)

顯示亮度              實時監測壓力上下限值

參數：   

low Rate Range 0.1 – 300.0 mL/min

Flow Rate Increment 0.1 mL/min

Flow Rate Accuracy* ±5% (5.0 – 300.0 mL/min; 80:20 Water/IPA; 1,000 psi)

Flow Reproducibility 0.5% RSD (5.0 – 300.0 mL/min; 80:20 Water/IPA; 1,000 psi)

Maximum Delivery Pressure 220 VAC supply: 10,000 psi

110 VAC supply: 10,000 psi (up to 250mL/min—see chart below for pressure rating curve)

Pressure Accuracy ±50 psi

Pulsation ≤5.0% @ 150 mL/min and 80:20 Water/IPA; 3,000 psi

Piston Displacement 452 μL

Piston Wash Self-flushing pump heads – continuous wash without auxiliary pump

Wetted Materials 316 Stainless Steel, Alumina, Zirconia, UHMWPE, PTFE, PEEK

Dimensions (H x W x D) 8.9” x 13.9” x 22.1” (22.6 x 35.3 x 56.1 cm)

Weight 50.0 lbs (22.7 kg)

Power 100 – 240 VAC (±10%), 50 – 60 Hz, 700 W

Front Panel LCD display to monitor flow rate, pressure, and indicate parameters and alarms. Numerical keypad, Run/Stop, and Menu Navigation.

Communication RS-232 (serial communications), Run/Stop TTL

Viscosity** 0.5 – 10.8 cP

Liquid Temperature 0 – 82 °C

Environment Indoor use only (Pollution degree 2)

Altitude Up to 2000 m (6500 ft)

Ambient Temperature 10 – 30 °C

Humidity 20 – 90% relative humidity

*Flow Rate is dependent on solvent selection and operating pressure. **Range of fluid viscosities where published flow accuracy is maintained.