中低壓反應釜套裝 NR-3000

釜體單層結構無底閥( 可以帶內襯)

5830050

NR-3000

反應釜套裝

SS

NR-3000 Set of basic reactor made of SS  316TI , volume 3500mL for usage with or without PTFE-lining.Includes reactor  vessel with lid made of SS 316TI, O-seal ring (FPM,143x4,0mm),  manualquick-lock closure ring, standard fittings( rupture disc made of Monel,  25bar, with rupture disc holder and vent valve,nominal width 4mm), two  handles and connection ports for heating/coo領 coil (2x 6mm connections),  magnetic clutch RV-100 (1x M30 connection) as well as two 8mm swagelok  connections.

釜體單層結構帶底閥( 無內襯)

5830055

NR-3000

反應釜套裝

SS BV

NR-3000 Set of basic reactor made of SS  316TI , volume 3500mL for usage with bottom drain valve.Includes reactor  vessel with lid made of SS 316TI, O-seal ring (FPM,143x4,0mm), manual  quick-lock closure ring, standard fittings( rupture disc made of Monel,  25bar, with rupture disc holder and vent valve,nominal width 4mm), two  handles and connection ports for heating/coo領 coil (2x 6mm connections),  magnetic clutch RV-100 (1x M30 connection),bottom drain valve as well as two  8mm swagelok connections.

釜體夾套結構無底閥( 可以帶內襯)

5830060

NR-3000

反應釜套裝

SS J

NR-3000 Set of basic reactor made of SS  316TI with jacket, volume 3500mL for usage with or without  PTFE-lining.Includes reactor vessel with welded-on and isolated jacket for  heating/coo領 with circulation heater/cooler, lid made of SS 316TI, O-seal  ring (FPM,143x4,0mm), manual quicklock closure ring, standard fittings(  rupture disc made of Monel, 25bar, with rupture disc holder and vent  valve,nominal width 4mm), two handles and connection ports for  heating/coo領 coil (2x 6mm connections), magnetic clutch RV-100 (1x M30  connection) as well as two 8mm swagelok connections.

釜體夾套結構帶底閥( 無內襯)

5830065

NR-3000

反應釜套裝

SS J

NR-3000 Set of basic reactor made of SS  316TI with jacket, volume 3500mL for usage with bottom drain valve.Includes  reactor vessel with welded-on and isolated jacket for heating/coo領 with  circulation heater/cooler, lid made of SS 316TI, O-seal ring (FPM,  143x4,0mm), manual quicklock closure ring, standard fittings ( rupture disc  made of Monel, 25bar, with rupture disc holder and vent valve, nominal width  4mm), two handles and connection ports for heating/coo領 coil (2x 6mm  connections), magnetic clutch RV-100 (1x M30 connection), bottom drain valve  as well as two 8mm swagelok connections.

釜體內襯

5830100

NR-3000 PTFE內襯

NR-3000 PTFE-linig consisting of  lid-lining, lining of dip-tube, PTFE O-Ring(127x4,0mm) and PTFE-insert  (3000ml)(Working termperature Tmax > 230℃ )僅適合無底閥反應釜使用

通用附件

5727090

RV 100 磁耦軸承

Magnetic clutch RV 100/SS (torque 100  Ncm, 300 ℃ ,max. 4000 mPas (1.5 cP) at 10,000ml, made of SS) foruse with  anchor stirrer made of SS 316 TI

5727400

RV-400 SS 磁耦軸承

Magnetic clutch RV 400 made of SS 316 TI  with Reed contact, torque 400 Ncm, 300℃ , EX-proof zone 1

5945920

錨式攪拌漿，SS

Anchor stirrer made of SS 316 TI

5701017

PTFE 高壓泄壓管

PTFE High pressure tubing (2.5m; ID 9mm;  550bar)

Exhaust tubing for rupture discs,  G3/8" female (inlet)-G 3/8" male (outlet)

5708198

O- 型圈

O-ring 157×4 mm made of Viton  for reactors without PTFE-lining

5751455

爆破片 25bar

Rupture disc made of Monel, D 24mm, 25bar  with PFA protection foil and certificate

其他可選配件、備用件

閥門

不同材質的底部排水閥及氧氣閥門可選

壓力測量

多型號壓力表和壓力傳感器可選

加熱/ 冷卻盤管

不銹鋼材質，另有帶PTFE涂層的盤管可選

磁耦合傳動軸堵頭

不銹鋼材質和帶PTFE涂層的不銹鋼堵頭可選

通用附件

高壓管路、泄壓閥、氧氣閥門、液體進樣、

加熱攪拌單元

多型號頂置式攪拌、攪拌槳、溫度控制器、加熱套、恒溫夾套、熱電偶傳感器可選

攪拌單元安裝附件

彈性聯軸器、電機固定架、磁耦合傳動軸等附件可選

升降支架

For a functioning configuration one lid  fixation and one reactor fixation are needed beside the basic lift system.多型號整體升降支架可選，

O 型圈

O-Ring ，多材質可選

CR5703000

回流冷凝管

Reflux Condenser for NR-3000 DN50 500mm

CR5703001

Coo領 Fin

Coo領 Fin 500mm